1M Style Bumper installation issues HELP
Bought the 1M Style Bumper from LTBMW
The the ducts that came with the bumper is either MISSING the top half or needs modification.
I say it maybe missing the top half is because as you can see, there are tabs on the end that indicate to me that something clamps to it.
The problem is that the ducts channel air up to the air filter on our original ducts....
BUT on the 1M ducts is only "HALF" of our original duct...
Do i need to cut the top half off the original duct and mold it to the 1M duct or what?
i appreciate it if THE TECH could chime in or ANYONE with this bumper installed could guide me
see pics
pic#1 1M duct temp installed looking at the bumper
pic#2 The tabs of the 1M duct
pic#3 1M duct temp installed
pic#4 looking from behind the bumper. the problem is the duct does not channel air up (missing something?)
pic#5 Original M3 duct
pic#6 1M duct (left) and original duct (right) side by side
pic#7 1M duct (left) and original duct (right) side by side
__________________
'11.5 SG E93/6MT/ALL BOXES CHECKED
BLACK GRILL/BLACK SIDE GILLS/15% TINT/PAINTED REFLECTORS/SPACERS/ANGEL iBRIGHTS/20'' VOSSEN CV3/VINYL WRAPPED SHADOW LINE TRIM/ETS-POWER TUNE/
///M-FLIGHT MEMBER
|