Quote:
Originally Posted by Cap'n
Tom / David--
I'm thinking of running 20" BBS CH-R (9/10.5 Rear, +24 Offset F&R) with Eibach or H&R springs. Tirerack is suggesting 245/30 up front and 305/25 in back, but as my friend tibra points out, that's a big stagger compared to stock, and I'm worried about rubbing.
You have any tire and spacer recommendations based on the above setup?
Thanks!!
http://www.tirerack.com/wheels/Wheel...+Stainless+Lip
|
305 is a very large tire, I doubt any spacer will be needed in the rear. Front can probably use a 10mm, measure beforehand to be absolutely sure.
Aim for a tire with a rounded sidewall (ie: Toyo) or you may need to dial in some camber in order to prevent rubbing under load.