Quote:
Originally Posted by M3PO
Yep, you must be careful not to spin the SC beyond it's limit though.
|
with ESS, you are ok going up to 650 kit and compensating with a smaller pulley and crank set up.
Currently I run a custom 128mm crank and 95mm SC pulley for the VT3 set up and I make 7,5psi at 5300 ft.
At sea level this set up would make around 10 psi
Its not 2 psi its actually 22% loss so you apply a factor of 0,78 to whatever the SL rating is
There is no chance you could a run a LC VT3 motor at the desired 10-12 psi level at 5300 ft on the current T3 Vortech blower.