Quote:
Originally Posted by edwinm3
3m tape and 2 screws at the bottom at the factory location, you'll have to drill the 2 holes on the diffuser yourself. I used a little bit of betalink on the top edge so it would be flushed and no gaps, I hated the way it looked with the 3m tape.
|
No Beta link should be required. The install with the 3M tape is all down to technique. We are working on doing a video to show how to do it best. It's not as clear cut to show in videos. I can refer anyone to their nearest Challenge dealer that I know is trained to install aftermarket lips/diffusers etc.
I have recently showed a customer that had it not installed properly how it can be done correctly and result in a part with no gaps etc. The installation technique is really that important.