hey guys, I'm looking of some advice on how to run my setup
I got a set of TE37's from my previous non-M but these were quite aggressive on my original car so I am wondering if they will work on a Mcar
The specs are
18x9.5 +28 (I assume this will be for the front)
18x9.5 +22 currently have 265/35/18 PSS on them
So what I was thinking is:
1) run square setup of 265/35/18 on all
2) to put the 265/35/18 tires on the front and run the fattest possible tires on the rear w/o rubbing
Also, will I need spacers to prevent rubbing on the suspension struct?
I am currently on stock ZCP ride height which I think is 10mm lower then reg M3. I am not looking for the stretch and poke look but something that is optimized for this car to decrease unsprung weight and increase rear traction.
My goal is to have the best setup for daily and I can use it for track as well. Advice from you guys will be greatly appreciated as I am very new to Mcars and very excited to bring it to my first track day when spring/summer comes.