Quote:
Originally Posted by terahertz
So I went to get an alignment with swift spec r springs. I have pulled alignment pins.
Front:
-1.4 degrees left (max negative)
-2.5 degrees right (max positive)
I'm thinking something is bent on the right side, since it's impossible to have that much camber with no camber plates.
Anybody have an educated guess as to what could be bent? 
Thanks |
Your numbers seem incorrect. Both are negative, with a 1.1 degree difference from left to right. You have listed one as "max negative" and the other as"max positive"?
Do you have a scan of the alignment printout that you could post?