|
Well stupid me accidently reset the front pads when trying to do the rears so now both the front and rear are giving me warnings.
Also I unplugged both sensors and re plugged them so it probably thinks they were both triggered.
I now spliced both the front and rear sensors and it still won't let me do the reset....
It still just shows - - - after doing the reset.
I'm not sure what else to do...
I'm going to pull the battery tomorrow as a last resort and see if that does anything.
Right now the ebrake light stays on all the time and I'm getting warnings every time I start and turn off the car showing the car on a lift and telling me to change the pads
Does the splice trick only work if the sensors haven't been triggered at all perhaps?
|