Quote:
Originally Posted by Cal@Sonic MS
Inspect your connectors. You may have to utilize a pair of pliers to re-orient the pins as they can be a bit flimsy and retract inside the connector.
This is a common issue we've experienced with the LUX and can cause the flickering issue you are experiencing - but is an easy fix.
|
+1 I had the same problem. It was able to push the connection in enough to get it to stick and all is good, no big deal. I thought I may have pulled on the wire when installing. It is so cramped in there that you have to put some tension on those wires to get everything into place.