Quote:
Originally Posted by gallian93
Hey folks...
after a lot a searching with a lot of "almost" results i am sorry to say that i have to post "another fitment question" .... apologies in advance
what i've got
VMR 710
19 fronts 10" ET 25
19 rears 11" ET 22
all stock suspension
what i want..
i have a set of conti DWS 275/35/19 that i want to put in the front...
I also know that the front tire "may" look dementedly meaty... but i already paid for that and if it doesn't fit...no biggy and no loss because i already have the tires... but some input would greatly be appreciated
The bigger question is for the rear and was thinking about ordering conti DWS 295/30/19 for the rears...
all the threads i've read seem to imply that a PPS 295 with an ET 25 = zero rubbing...
i wonder if that will be true for the conti 295 with an ET 22... does anyone have this set up?
Any advice before i blow the dough?
thanks all
|
I hope you get your tire fitment issue squared away and I don't mean to threadjack, but I just want to point out that you have installed the heaviest wheels capable of fitting on an M3 (which increases unsprung weight and kills acceleration). Plus the already heavy nature of the e93, your car would be dramatically faster with a primary cat delete and a 3.62 rear-end. The primary cat delete will give you 20lb ft of torque increase all across the RPM range and the rear end with a higher final drive ratio will make your car rev much quicker and feel much faster.