Kas: 290whp @ 5590 RPM, 314wtq @ 3350 RPM
Car and Modifications:- 2008 335i BMW M3
- Britalman Exhaust
- Juice Box +
- SMG
- 91 Octane
Conditions:- Temparature:: 76.94 degrees F
- Atmospheric pressure: 30.02 inHg
- Humidity: 27%
- SAE Correction: 0.979
- STD Correction: 1.006
- Uncorrected: 1.000
Results:- SAE Corrected: 290whp @ 5590 RPM, 314wtq @ 3350 RPM
- STD Corrected: 298whp, 322wtq
- Uncorrected: 297whp, 321wtq
Dyno Database:Dyno Results: SAE-Corrected
Dyno Results: STD-Corrected
Dyno Results: Uncorrected
Video:
Individual Dyno Results:
Individual dyno results are shown below. SAE corrected results are shown twice, using two different sources. The first source (SAEd) are the SAE corrected results straight from the Dynojet. The second source (SAEk) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula. This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.
The legend below has the following meaning:
- Dyno Run: Dyno run file
- Boost Avg: Boost calculated using trend line. This is the "official" boost for this dyno run.
- Boost Peak: Peak boost observed on this dyno run.
- Temp(F) = Temperature (Farenheit)
- RelH = Relative Humidity
- Pressure(Hg) = Barometric Pressure
- DA(ft) = Density Altitude
- WHP(unc) = Uncorrected wheel horsepower
- WTQ(unc) = Uncorrected wheel torque
- WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
- WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
- WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
- WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.
Dyno Run | Temp(F) | RelH | Press(Hg) | DA(ft) | WHP(unc) | WTQ(unc) | WHP(SAEd) | WTQ(SAEd) | WHP(SAEk) | WTQ(SAEk) |
Run_002 | 68.2 | 57.9 | 29.87 | 819 | 291.2 | 319.1 | 284.4 | 311.6 | 285.2 | 313.1 |
Run_003 | 67.8 | 57.9 | 29.88 | 792 | 296.6 | 320.8 | 290.3 | 314 | 291.2 | 315.1 |
* Entry used for the Dyno Database
tlrid3r: 309whp @ 5120 RPM, 328wtq @ 4160 RPM
Car and Modifications:- 2008 335i BMW M3
- BMS Filter
- Juice Box-4
- SMG
- 96 Octane
Conditions:- Temparature:: 74.10 degrees F
- Atmospheric pressure: 30.02 inHg
- Humidity: 30%
- SAE Correction: 0.976
- STD Correction: 1.003
- Uncorrected: 1.000
Results:- SAE Corrected: 309whp @ 5120 RPM, 328wtq @ 4160 RPM
- STD Corrected: 318whp, 337wtq
- Uncorrected: 317p, 336wtq
Dyno Database:
Dyno Results: SAE-Corrected
Dyno Results: STD-Corrected
Dyno Results: Uncorrected
Video:
Individual Dyno Results:
Individual dyno results are shown below. SAE corrected results are shown twice, using two different sources. The first source (SAEd) are the SAE corrected results straight from the Dynojet. The second source (SAEk) of SAE corrected results are obtained by using the Kestral 4500 weather station data for each individual dyno run and running it through an independent SAE correction formula. This ensures that the dyno results are accurate and can be independently audited and verified for authenticity and accuracy.
The legend below has the following meaning:
- Dyno Run: Dyno run file
- Boost Avg: Boost calculated using trend line. This is the "official" boost for this dyno run.
- Boost Peak: Peak boost observed on this dyno run.
- Temp(F) = Temperature (Farenheit)
- RelH = Relative Humidity
- Pressure(Hg) = Barometric Pressure
- DA(ft) = Density Altitude
- WHP(unc) = Uncorrected wheel horsepower
- WTQ(unc) = Uncorrected wheel torque
- WHP(SAEd) = SAE Corrected Horsepower using Dynojet weather station.
- WTQ(SAEd) = SAE Corrected Torque using Dynojet weather station.
- WHP(SAEk) = SAE Corrected Horsepower using Kestrel 4500 weather station.
- WTQ(SAEk) = SAE Corrected Torque using Kestrel 4500 weather station.
Dyno Run | Temp(F) | RelH | Press(Hg) | DA(ft) | WHP(unc) | WTQ(unc) | WHP(SAEd) | WTQ(SAEd) | WHP(SAEk) | WTQ(SAEk) |
Run_002 | 66.5 | 56.7 | 29.88 | 694 | 316.8 | 335.8 | 309.2 | 327.7 | 309.7 | 328.5 |
Run_003 | 66.5 | 57 | 29.88 | 696 | 315.9 | 335.2 | 308.3 | 327.1 | 309 | 327.8 |
* Entry used for the Dyno Database