View Single Post
      04-01-2024, 03:43 AM   #442
andrihallik
New Member
4
Rep
6
Posts

Drives: E92 M3 DCT Silverstone II
Join Date: Oct 2020
Location: Europe, Estonia

iTrader: (0)

Quote:
Originally Posted by Redd View Post
Thank you for sharing this! Any part number for the calipers? Did it require new brake lines?
Right now used the old brake lines that were on the e92. Probably upgrading to braided lines when next brake pad change comes - right now used the same pads that came with the used 7 series calipers, half worn pads for testing.

So far ~5000km the wear on the disc is even - on top side of the disc the lip/wear continues from the same spot that the original e92 m3 pads touched so ~1mm from top. On bottom side where the pad was cut they go over the disc little bit so no lip there anymore. With new pads i can use them as template to get correct size pads.

I used G11 7 series 2017 non m brakes. (not painted calipers)
34116891275
34116891276
The M brakes on 7 series are bigger (the two cylinders on front of the caliper have some room). This video is very informative but misses the non painted calipers, exactly the same but not painted.

Last edited by andrihallik; 05-13-2024 at 04:33 AM..
Appreciate 1