Quote:
Originally Posted by 63NP
Converted from a 2007 E91 318i m-sport auto transmission.
- Donor car is an E90 M3 (and the E91 318is an mentioned)
- Fenders were custom made by combining M3 E90 wheel arch with E91 quarter panel
- Rear bumper is the M3 E90 spliced with the E91 M Sport
Just having brackets and bells made for the 6 pot BBK's for the front(yellow) and touch up paint and she's finished.!!
thx 4 lookin..
More details:
My car has M3 engine/gearbox (DCT), full suspension(now KW V3 Coilovers), driveshafts, cradles, exhaust, propshaft, loom (rear e91), front panels/lights, full interior (back of back seats taken off the e90 and retrimmed onto e91 seat). Back door panel the same but e90 doesn't have rear speakers so i fitted rear speakers (Pioneer.!! i know bad move).
Took about 6 months (give or take a few weeks) = stripe e91, paint engine bay, fit engine/gearbox/running gear, electrics, paint again(everything), build complete car then programme ecu's/modules.....
Difficult part of the build was rear quarters/rear bumper..
If i built the car from scratch it would be documented.
As for the CF roof, you don't get one on a E90 M3.!!!!!
Hope this clears up a few things.
it has been built over a year now, she needs a bit of paint(just striped the headlining/sunroof out and had the roof/spoiler done black & new roof rails), BBK'S for the front(as we speak) & programme the new CIC nav then shes finished...
thanks again....
Attachment 489152
Attachment 489153
Attachment 489154
Attachment 489155
Attachment 489156
Attachment 489157
Attachment 489158
Attachment 489159
Attachment 489160
Attachment 489161
Attachment 489162
Attachment 489163
Attachment 489164
|
Love the car, nice job!
What kind of covers did you use for the headlight washing system?