Quote:
Originally Posted by Technic
Try the new LC2i first, with AccuBASS threashold full clockwise and AccuBASS gain at minimum from the beginning. Use the Bass output, GTO disabled and use a fuse at the 12V input of the LC2i.
If still not satisfied then contact forum member Mike Benvo, he can code your CIC remotely. I can provide you with the PnP RCA harness for the back as shown in the other thread.
Remember, you will need at least 8-channels of amplification and a DSP processor.
|
I already have a new one. The third one is on the way but I wasn't planning on opening it. You said GTO was automatically disabled when a remote wire is used. Do I need to change the jumper anyway?
I can go to Mike's house, so that's not an issue.
What do you recommend for a dsp? I would use JL HD amps for the 8-channels.