Quote:
Originally Posted by swamp2
The attached document states 0.003 not 0.0003. But since you mentioned the extra 0.001 or 0.002 it sounds like this was just a typo. You might try to check the run out in the other direction as well as the prior poster suggested. However since that probably is not a machined surface getting a good number may be difficult.
Also, first before replacing your rotors I would definitely have your wheels rebalanced. They can become imbalanced just from wear.
|
Yes, typo. Thanks. I'm having the wheels rebalanced now and the day I had the dealer install the new ARC-8's and tires, they balanced it and still that evening first drive on the highway, I got the vibe. So at this point, It's got to be the rotors, I would think. Everything else has been checked out and is straight, tight, not worn, etc.