Quote:
Originally Posted by elm3
Maybe the actual bulb might be faulty, since the same bulb is low and high beam. Try switching the bulb from the left and put it on the right and try the high beam and see if it works. If it works, then you know the sytem is working properly and it is indeed the bulb.
|
I don't think the light bulb is faulty. I believe the fault is in the "shutter mechanism" that needs to be coded to the control unit in order to make it work...
I bought a new pair of HID bulbs before realizing the control unit was bad. I can always give it a try and change bulbs if needed, but I'm sticking to coding the control unit.