|
For those of you that has a front lip installed with their oem screws covered by the lip and want to remove the bumper without removing the lip there is a way. You remove the bumper with the lip and whole undertray altogether that way you don't need to detach your lip and having have to get it installed again. I find this method much easier rather than removing everything piece by piece.
Remove both wheels
Remove both fender liners
Remove 4 8mm screws 2 on each end of bumper
Remove the 3 10mm bolts on the undertray
Unhook both cable supporting the undertray
Remove 4 torx screws on top of bumper
|