I decided to paint it to match. My local shop is installing it using the 9 screws and a small amount of adhesive on the back side under the car to make sure it holds tight. I would like a tight as fit as possible and they assured me if I want to have it removed or swapped it will not be an issue. It would be an issue if the thing comes off while doing 150+ on the autobahn, so better safe then sorry. As for how to physically install it myself, I can't help you. I do know they needed to drill the holes for the screws to mount to the front end. There should be larger holes on the bottom side, that are used as access holes, but that's were the screws should mount. Will try and post pics soon.
