Quote:
Originally Posted by M3SQRD
Quote:
Originally Posted by bigjae1976
Even then that's not a lot of material. Just went through a class at the track this past weekend about fatigue and parts breaking. I would imagine that as you have less contact between the inside of the wheel and hub lip that the load is transferred to the studs/lug bolts. Given the experiment we witnessed...the life of the wheel fasteners is greatly compromised.
I ran a 5mm space for awhile but I had a 3mm hub extender.
|
It's a simple "hollow-pin in socket analysis" under combined bending, lateral shear and axial load. Only the hub reacts a portion of the vertical shear - you'd be amazed at how much shear a lip with 80 mil of engagement with a 2.85"-diameter can carry. I'm comfortable with the > 3-4 mm of engagement I have with a 5 mm spacer. However, thanks for your concern
|
Lol...anytime! Still, my apex and OEM wheels have a taper on the back, appears to be at least 3mm. So is 2mm of engagement fine? I'm not an engineer but I know enough to make me dangerous.