BMW factory paint is very thin!
Okay so i had a one inch scratch on my passenger side skirt. It was about 2mm wide, pretty wide for a scratch and it was down to the plastic. I decided to use some touchup paint, clear coat then wet sand (2000grit) it smooth. I put 2 layers of paint, 1 layer of clear, and let it cure for a couple days. After 3 days, I decided to give it a light wet sand. I honestly used about 10 medium pressure wet sand strokes and i started seeing black plastic. the small scratch widened to a 4mm patch of plastic.
My other cars (Audi, Porsche, ford and older bmw) never had an issue with wet sanding.
I guess its going in for a respray...a thicker respray.
__________________
E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor.
Last edited by Wendall; 01-08-2013 at 05:29 AM..
|