Quote:
Originally Posted by Technic
1. No benefit... you will be fine with a PDX 2.150, as its 150W RMS rating is underrrated anyway.
2. P/N 51477122411 is correct for the Coupe. The Sedan P/N included the door.
3. The Enhanced OEM amp has the CD Changer bracket, so you can use it to create your own bracket to hold a PDF plank to install your amps.
4. Cut the OEM amp connector underseat subs outputs pins...
- 6(+) and 16(-) for the right
- 8(+) and 18(-) for the left
... and then install a 35-40V LOC at the OEM amp output side. Get this LOC: http://www.m3post.com/forums/showpos...4&postcount=12
The OEM remote signal is located at pin 13 in the Quadralock connector in the back of the iDrive computer. Just tap that line and run a wire to the trunk.
|
Awesome, Technic! I knew you'd be able to tell me exactly what I needed. This should be pretty straight forward. I saw your write-up on modifying the stock mounting locations to fit the SWS-8s. That's the only thing I'm worried about screwing up.