Thread: HRE R40
View Single Post
      02-12-2013, 10:20 PM   #7
slicer
Major General
slicer's Avatar
2738
Rep
6,734
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by Mike V8 View Post
Lol I didn't realize I didn't ask anything! So they are a good track wheel then. Any input on a optimal offset and size?
They are only available in 18". I would recommend:

18 x 9.5 et20 with 275/35/18 or 265.35/18 tires in the front (this offset / size will require some negative camber) You can go to et27 if you don't plan to get coilovers. et20 will allow you to run KW clubsports without spacers.

18 x 10.5 et27 with 295/35/18 tires in the rear (this tire size is hard to find so most people end up using 285/35/18 tires in the rear)
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0