Quote:
Originally Posted by The Dez
I have stock 220m on my 09' e93 m3. Planning on putting 20mm front and 15 rears. Would i rub with out any drop? Also i have EDC Thanks guys.
|
With 220 wheels I would go with a 15/12mm setup. With a 20/15 you will probably run into rubbing issues.
Quote:
Originally Posted by Buddy Revell
Will 5mm spacers on my 20 x 10.5 et25 rears work without rubbing, assuming I'm not lowered? I'm currently running 295/25/20 Ventus but may go 305/25/20 in the future.
|
That one is a tough call, 20x10.5 et 25 is pretty aggressive. That one would be best if you could measure with a tape measure.