When I remove large bushings or wheel bearings, I use a big washer the size of the bushing shell, a short piece of pipe big enough for the bushing to slide into as it's coming out, and a big bolt, washer or plate with hole to cover the end of the pipe, and a nut to create an at-home press to pull out the bushing. Often times, the new one can be pulled in in a similar fashion.
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
|