Quote:
Originally Posted by ban25
After I cooked my calipers and had to get them rebuilt, I ordered a set of titanium heat shields for the fronts:
http://hardbrakes.com/
I've had these in for 7 track days and so far so good...if I do cook them again, I'll install a ducting kit, but this is a much easier and faster fix for the time being.
|
I thought I'd post an update here as I just changed out my front pads after 6 track days. Here's what the heat shields look like:
This is the side facing the pistons. Notice the gold color with slight bits of purple. This means that the backing plates on the pads (e.g. caliper side) are reaching approximately 750F (400C). Also notice the uncolored circular regions where the pistons are making contact. I didn't take a picture of the reverse (pad side), but it is solid gold in color with significant purple stripes.