[GORDON.M3]

If the car was single hump non-idrive you will need a steering column module from a car that had M-Drive to begin with.

Then you can code in M-Drive into the Vehicle Order and program the settings without i-Drive as if you were driving a GTS car.

As long as you can make one of the buttons on the KMP wheel M, then you can save the settings. Holding down the M button longer for 3 seconds saves the last known settings.

You will still need the power and traction button if I recall correctly.

I've coded it on my single hump M3 before I converted it into an Extended Double.