View Single Post
      12-15-2012, 10:18 AM   #4
slicer
Major General
slicer's Avatar
2733
Rep
6,732
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Quote:
Originally Posted by Z K
The wheel and tire fully fits under the fender when compressed. It just hits the fender liner where I described. I don't think the tire hitting the fender is a problem in my case. I am mainly worried about that bolt. If I trim the fender liner and it hits the bolt that'll really screw up the tire.
You might be surprised... Place some blue painters tape in both areas and take the car for a drive to confirm. I went through the same process and learned that it was hitting the fender (in the front towards the door).
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0