Here at Gintani, we like to change the game and we have kept this secret for a while. Our shop car has been running for a bit now (6 months) but here is a teaser of our twin turbo kit for the e9x m3. This will be a production kit, it can only be installed by our shop (california) or our dealer in new jersey. It is tuned on the factory ecu.
We are sure everyone is going to have tons of questions but please bare with us. The finish line is less then 2 months away. We are on the final stage of completing the production parts. We will release all technical information when we are 100% ready to take orders.
This is just the beginning, we have many other products coming for the E9x platform.
Thank you for your support,
Team Gintani
818-787-8260
sales@gintani.com
(6-8-2013) Update: Exhaust Manifold:
http://www.m3post.com/forums/showpos...&postcount=246
6-10-2013 Update:
Thank you guys for the support, we know you guys are eager or more information but we are slowly releasing information as the weeks go by. This thread is to show you the progression as we get closer to releasing this kit to the general public. We are showing you that there is still hope! Don't give up on this m3! With that being said, We are extremely busy making this dream into a reality, expect some more information, including a video within the next two weeks.
1/7/2014 UPDATE:
Hey guys, we understand that everybody is more than frustrated with the delayed progress and updates on this thread. It was our fault for releasing the information way too early without considering running into a few bumps along the way. We would like all of you to understand, this project had started out for us to have some fun with our own personal car. When we decided to make this into a production kit, there were a lot of changes that needed to be made for everything to fit like oem and for everything to be safe. The space we are working with is more than tight. This is not one of those turbo kits that you can build using just aluminum piping and U bends.
As of now, we have made a lot of changes even to our turbo manifolds and extreme changes to the piping. We are doing our best to finish the production pieces which will include a lot of cast pieces.
The car has been taken apart again for a few more changes. We will be testing fitment of newly designed pieces. We will be putting the vehicle back together with the fabricated pieces and old design turbo manifolds and will continue further testing with these components until the final production pieces are completed.
We understand an update has been long overdue, so here are a few videos of the kit. Enjoy.