Quote:
Originally Posted by paintpro21
At bimmerfest we bolted wheels onto a 335i. They were 18x9" ET31 fronts with 255/35/18 Toyo R888 tires, and 18x9.5" ET35 rears with 265/35/18 Toyo R888 tires.
 |
Question I have is:
Will Profile 1 wheels all have the same concavity, or will they change based on width. Then, secondly to that, will the concavity be the same for the same profile and width, or will offset change the concavity again?
The pic above, both wheels fall into the Profile 2 category. However, with the angle of pic, I can't tell if they are about the same in concavity, or if there is more in the rear with the wider wheel yet higher offset.
Main reason for this question is that, I want to run a Profile 1 18x9.5 +58 in the rear and probably a Profile 1 18x8.5 +35 in front. but I want to make sure the Rear is more concave then the Front.