06-15-2011, 12:13 PM
|
#3
|
O! So Sour!!
Drives: Fast 240z / Slow M3
Join Date: Apr 2007
Location: 'Merica!
|
Quote:
Originally Posted by paintpro21
Yes, you still need to use the ring. The spacers are only hubcentric with wheels that are already the correct center bore. You'd have to custom machine a spacer to work without the ring.
spacers less than 10mm can not be machined with a hub centric extension. spacers 5-9mm generally do not leave enough material for the wheel to catch the factory lip, and 10mm spacers can be just short enough to float on the factory lip and not seat properly (which will end up cracking the extension off the spacer).
|
Thank you!
|
|
|