Quote:
Originally Posted by 540gone
What thickness spacers F & R are you using. I assume they are different if you are getting a different amount of stud projection. It looks like the front fitment in the picture is about the thickest spacer that can be used with the 75mm studs. TIA.
|
i have a 15 front and 12 rear MS spacers for my stock wheels and use only the rear spacer when on my track set. the 75mm kit is supposed to be used with a max of 12.5mm spacer but did some measuring with a caliper gauge to make sure this would work. the front nuts make contact with the stud up until the last thread on the outside of the nut so i have lots of contact with the stud. the rear fully threads the nut.