Quote:
Originally Posted by Radiation Joe
Use a 10mm or 12mm in front. They are typically stronger. The 23-25mm offset you end up with will not be a problem.
In the rear, I don't think you could even see a 2mm difference? It certainly won't make a difference in the handling.
Hope that helps.
|
Thanks Radiation Joe. I dont think the rear is a problem. I can get 8mm C&C hubcentric spacers here customed. Does going to 10mm on the front have any implication on rubbing or so forth? AFAIK, the front offset is 29. My rims are +35 offset so going to 10mm spacers would imply an extra 4mm on the front. Is this ok?