Hi all,
Finally back in action - sorry for the quiet patch.
I dyno'd again - before and after flash.
rpm,hpbefore,hpafter
3000,124.2,130.3
3500,158.2,167.3
4000,190.5,203.0
4500,215.4,233.3
5000,235.0,259.2
5500,254.3,290.1
6000,276.2,320.4
6500,300.3,347.0
7000,325.4,369.6
7500,344.5,388.6
8000,missingdata,401.8
rpm,tqbefore,tqafter
3000,294.9,209.4
3500,322.0,340.5
4000,339.2,361.5
4500,341.0,369.3
5000,334.8,369.3
5500,329.3,375.7
6000,327.9,380.4
6500,329.1,380.3
7000,331.1,376.1
7500,327.3,369.1
8000,missingdata,357.7
humidity 89%
pressure 1012milibar
temperature 36deg c
gas is shell95oct with 1:500 Pennzoil Outboard TC-W3
http://www.shell.com.my/products-ser.../unleaded.html
http://products.pennzoil.my/industri...cycle-oil.html
I remain over-the-moon with Mike Benvo's tune - this is hard evidence of how good it really is. Thanks again for your help - I hope this post encourages everyone to follow through with it.