Quote:
Originally Posted by dmw16
I apparently need to RTFM a bit
The start/stop points are set in the race studio software, right?
|
Quote:
Originally Posted by ThunderMoose
PM Richard at M-world for start/stop info. I believe you can set at track or in RaceStudio if you've driven at track. I suspect there is a way to transfer maps from other guys that you drive with that own Solo's.
|
There is a couple ways to set start-stop points.
1. If your track already exists in AiM's database, there is no need to do anything. Solo DL is preloaded with over 100 tracks in the USA.
2. If you have a track map file from others, you can upload it in GPS Manager.
3. If the track does not exist in the database AND you don't have a map file, here is what you do.
Q: If my track is not in the GPS Manager database, what should I do?
A: Check with the race track's safety personnel to make sure that you can safely access the start/finish line. Next, bring your Solo/Solo DL to the desired start/finish line. Then, allow the unit to discover GPS signal. Scroll through the main display screen to "OK: Start GPS Marker." Finally, press OK.