Tom,
Nobody is challenging you. I appreciate what you guys do and I said long time ago that you guys did a good job remember ?
http://www.e90post.com/forums/showpo...&postcount=148
I didn't create any impression nor I mentioned anywhere in that thread that coding was done by Autologic. Autologic was used just to show that the vehicle had FRM2 module.
As the matter of fact, I was the one who mentioned in your Q&A that FRM2 may needs to be replaced. Being inexperienced ( as you say ) I was able to figured that out before you mentioned anything about it.
http://www.m3post.com/forums/showpos...2&postcount=79
I did purchase autologic not too long ago, but with the help from guys at autologic (Andrew, Keith, Brian) I was able to learn quite a bit within this period of time. For those who don't know how autologic works, it is pretty simple, it has step by step instructions and it tells you what to do step after step. Before anything was done on my customer's cars, I did use my 80k car as a guinea pig to make sure no harm will be done.
The reason why I didn't answer your questions should be obvious to you - you are working on the same project.
And to be clear again, I never took credit for what you guys did ... if you can prove that I did , you should post that. Otherwise you should take it back.
BR,
Aleks.