Quote:
Originally Posted by Gearhead999s
When you change the pads for the comparison you might have an issue with dissimilar pad layer on the discs.You either have to figure out how to clean your discs and do a proper bed in of the new pads.If not your impressions could be skewed.Who knows maybe it will not even be an issue.If the ST pads are similar to the Pagids in make up this might be a waste of time to worry about..
|
All out race pads (like pfc01 and xr1) don't need bedding... in fact when cold they are so abrasive it will remove all bedding from previous pads. then when you bring them up to temp they put their own bedding down. if you want to clean off the surface of your rotors just put race pads on and drive on the street home
