Hey Guys,
I did the exhaust mod and took a video of it. Its my first video so i apologize if the editing isn't the best.
I did it for under $100. It would have been close to free if I had a welder. I ended up paying someone $85 to weld it up for me.
I've seen some people paying $400+ to get this done.
you can save yourself a few bucks.
Removing the exhaust takes about 10 minutes, and 15 minutes to put it back up.
I used a $30 grinder that you can buy as well.
and a $4 cutting disc.
You can cut the inside pipes yourself, or have your welder do it. Takes 2 minutes to cut them yourself if you have a sawzall.
Anyways, here's the video. Any questions feel free to respond on the video, or on here. OR, just PM me.