View Single Post
      03-28-2008, 10:28 PM   #1
rmashman
Private
18
Rep
59
Posts

Drives: 2008 M3
Join Date: Nov 2007
Location: San Diego

iTrader: (0)

Post Fluid quantities and types for engine, transmission and differential

I recently decided to purchase access to bmwtechinfo.com for a day so I could check on various procedures.

From my owners manual, its says that the oil in the engine, transmission and differential are changed at the post break in-1200 mile service. It didn't mention the oil filter so I don't know if that is changed or not.

After looking at various procedure and data pages I was able to come up the the capacities and types of lubricants that are required for the 1200 service. It might be wise to confirm that your dealership is using the correct lubricant for each of the three applications. Sometimes shops use only one grear lubricant for all applications. But a specific and different oil is necessary for the transmission and differential.


Main Lubricants for E92/S65 M3
Engine-
w/filter 8.8 liters,9.3 quarts
no filter 8.4 liters,8.9 quarts

BMW High Performance Synthetic Oil Castrol RS SAE 10-60, also called
Castrol TWS Motorsport SAE 10-60
07 51 0 009 420 (liter)

oil filter 11 42 7 837 997


Transmission - 2.1 liters, 2.2 quarts

Castrol MTF-LT-2
83 22 0309 031 (five liters)
83 22 0406 941 (half liter)

Castrol MTF-LT-3
83 22 7533 818 (five liter)



Differential - 1.1 liters, 1.2 quarts

SAF-XJ Synthetic Final Drive oil for Limited Slip Differential
83 22 1 470 080 (55 liter drum)
83 22 1 467 993 (one liter)
83 22 2 282 583 SAF-XJ+ FM booster


From: bmwtechinfo.com

Last edited by rmashman; 05-26-2009 at 10:55 PM.. Reason: to correct errors & make additions
Appreciate 1
DrFerry6731.50