Quote:
Originally Posted by img
Not hard at all.
1. Show up at the gas station with an empty gas take. Fill up with 93 octane.
2. Show up at the dyno. Measure the pulley size. The ESS pulley size is very well known, but the AA pulley size isn't. I've got a friend in Cali who has an AA kit. We'll compare against his.
3. Dyno with boost gauge. Make all dyno files and results public.
4. Run against each other on the highway and make all the videos and results public.
|
Pulley size I posted in my thread.
Level 1 uses a 105mm and our level 2 uses a 95mm pulley.
http://www.m3post.com/forums/showpos...3&postcount=45