Quote:
Originally Posted by MrHarris
VMR is hard to beat in sub 2k M3 wheel territory. Look better than stock with similar or slightly less weight.
|
I dont think it's less according to this link from 503 Alex:
http://bmw.pencilgeek.org/WheelsDB.html
19x9.5 at 25.5lbs
VMR 710's are going to be over 27.5lbs in the 19x9.5 ET22 in terms of weight.
I agree in the price range the Forgestars can't be beaten in this price point.
Strength: Flow Form cast - strength is high point 1500lbs per corner rating
Same technology Used on Formula 1 and Indy Cars. Advan/BBS which use same technology run upwards of $3000 for set, these are $1400 in your price range.
Data backup :
(
STL REPORT 19x8.5 (PDF 35K)
STL REPORT 19x9.0 (PDF 35K)
STL REPORT 19x10 (PDF 35K)
STL REPORT 19x11 (PDF 35)
Weight:
19x8.5 Approx weight 22.5 lbs
19x9.0 Approx weight 24.7 lbs
19x10. Approx weight 24.1 lbs
Sizes:
You can get the front with a 19x8.5 or 19x9, Rears you can do 19x10 or even 19x11 with 305 Tires. Custom sizes and offsets to your needs and specifications - so go agressive as you want or conservative as you want. Clears Big brake kits as well.
Pictures and links on it:
http://www.**********s.com/product.a...tar_F14BMW_KM4