Quote:
Originally Posted by elmariachi
Thanks Radiation Joe. I dont think the rear is a problem. I can get 8mm C&C hubcentric spacers here customed. Does going to 10mm on the front have any implication on rubbing or so forth? AFAIK, the front offset is 29. My rims are +35 offset so going to 10mm spacers would imply an extra 4mm on the front. Is this ok?
|
You won't have any problem with a 25mm offset in the front, especially with a 235 width tire. I do not recommend anything less than a 10mm spacer unless you use a special spacer like Turner sells
Read about Turner spacers