|
10-29-2012, 10:09 AM
|
#6
|
Major General 
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
You will have the bump stop issue no matter what system you use that retains the stock edc shocks. There isn't much point IMO to getting an adjustable sleeve-over kit if you only plan to lower 10 mm. If you want the most mild drop, dinan is your answer. Dinan is however over priced. I would recommend eibach springs with e36 bump stops. I previously ran eibachs with OEM bump stops and did not notice any issues with them. Ride quality was good and height was conservative.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
|
|
|
|