Better instructions would be nice for sure. I'm going to put together all the photos and notes I have for this for a DIY post.
I'm pretty much finished with the fronts. I just have to torque everything down to spec. It's taking so long since I only have a little time at night to work on it. I also don't have a 21mm-3/8in socket for my 3/8in torque wrench so I need to go buy an adapter or 21mm socket tonight. Balls! The back has to go faster.
__________________
I play real sports. Not tryin' to be the best at exercising. - Kenny Powers
Last edited by SlamMan; 06-23-2011 at 02:07 PM..
|