Quote:
Originally Posted by montreal red
1. First get the plug that runs to the driver side ballast.
2. Then pull the wire loom back as far as you can to expose the wires.
3. Then cut only the Black wire.
4. Pick up a ring style butt connector from your local hardware store or auto part store and crimp it on the black wire.
5. Then attach the new ground on the driver side shock tower area. Youll see a few grounds i connect this one where you see the yellow connector.
|
thanks for posting this! i hope this solves my problem but my issue is on the passenger side. guess i'll just have to try and see if it works.