|
I put a thin film of antiseize on the ends (joints) of the pipes. Won't hurt and may help.
If you have that 10 mm flex head ratcheting wrench to hold the top of the header to midpipe bolts, you can do this. Might take 2 hours since you will go slowly and look at stuff.
Resist the urge to just twist the 02 wires and remove them from the midpipe while still attached to the harnesses. You can do that but it is not recommended.
I do all my own work. I like doing it and I am not rich, so not paying shops leaves me more money for mods. If I worked 80 hours per weeks and made hundreds of thousands of dollars per year, I'd pay someone else to do this and spend my time making money. The little free time I had, I would want to spend driving my car.
|