Thanks for all the compliments guys! The brakes have been awesome so far.
Quote:
Originally Posted by JAJ
I think the new brakes look great!
One question, though, and probably a dumb one, but I'll ask it anyway. I've always seen slotted rotors set up so the angled slots "pull" the pads toward the center of the rotor as they slide past the pad in the caliper. Yours are set up to "push" the pads away from the hub and up into the caliper.
Are you positive the rotors are on the correct sides? If these were Stoptech they'd definitely be the wrong way around.
|
As for the orientation of the rotors, the slots don't really say much. It's the direction of the internal cooling vanes between the rotor surfaces that matter. The internal vanes need to pull air through the rotor from inside to outside. Project Mu might have their rotors set up different than the Stoptech set. The picture below shows another Euro Mevius set installed on an M3 with the same orientation.
[ATTACH]
Attachment 198676[/ATTACH]