View Single Post
      03-28-2008, 03:04 AM   #13
M3Kevin
Private First Class
M3Kevin's Avatar
United_States
10
Rep
128
Posts

Drives: Alpine White 2008 M3
Join Date: Mar 2008
Location: Phoenix AZ

iTrader: (0)

Garage List
2004 Corvette Z06  [0.00]
2004 GT3  [0.00]
2008 M3  [0.00]
Just did the V1 mount in my M3.

Unscrewed the sunflap drivers side, sunflap mount drivers side (near the center panel), passenger side sunflap mount.

The header then drops down enough that you can easily feel the retaining clips for the center mount -and pop it out. WAY easier than doing the damn screwdriver trick which ensures you mess up your headliner.

Anyway - at that point you need to bolt the ground to the 10mm hex bolt. And the power clip to the green/white wire in the 1st harness (on the drivers side). (there's a smaller 2 wire, 4 connector clip but ignore that one.)

You will need to peel back some of the felt wrap to find the wire - but it's easy after that.

The actual box get's mounted/pushed back towards the moon roof - and then you button it up.

Pretty easy.

Kevin