Quote:
Originally Posted by kmarei
i assume the green line is just the subs?
well, so much for everyone that said the SWS8 don't go below 30hz
i knew it all along, glad i was using the high pass on the subs at 20hz (lowest possible on MS-8)
what crossover points were you using?
i'd guess 120hz for the subs? and 200hz for the mids?
|
The green trace is the signal directly from the sub output on the amp. It reflects the factory crossover point. The blue trace is live from an RTA without the sub present.
The blue trace in the next pic is with the sub included in the RTA.