|
Yea, the clips are a pain in the ass. I actually stuck a small mirror back there to take a look and see what direction they were facing. The clips should be on the left side of the pin. You need something that is small and has a sharp point on it to fit in the small space of the clip. Once you have something stuck in there you should be able to just pull and slide the clip off the pin. Once it's out there is no need to put the pin back in. The tool I used to fit in the clip was one of those "picks" or "scrapers" (whatever they are called) that dentists use to scrape your teeth when you get them cleaned. It was perfect because it's very small and has a curve at the end.
|