View Single Post
      04-17-2011, 09:05 PM   #15
paradocs98
Lieutenant Colonel
paradocs98's Avatar
United_States
392
Rep
1,519
Posts

Drives: M2C
Join Date: May 2009
Location: NY

iTrader: (0)

A followup: After numerous discussions with both Forgeline and StopTech, everyone is scratching their heads. Forgeline received and used the correct StopTech template based on my brakes. Forgeline also says they have made numerous sets of 18x10 inch square GA3Rs and ZX3Rs for the E92/E90 M3 and this is the first clearance issue they've had. I sent the wheels back and they remeasured and confirmed that everything is to spec. But they're making good on the guaranteed fitment and building a new set of wheels for me. The offset will be the same, so the wheels sit in the same location relative to fender and strut, but they will add some material to the mounting pad, moving the face of the wheel out for more clearance, while taking some width out of the outer rim shell and adding width to the inner rim shell.

They should be here in a couple of weeks. I'll post another update at that time.
Appreciate 0