Quote:
Originally Posted by W///
1) I only jack up the front and it's fine. However, when it's time to refill and check the oil level, you obviously want to be flat.
2) I put the filter into the housing, then put cap on, press it down and start tightening. Don't forget to rub some motor oil on the big gasket on the cap.
3) Use a turkey baster. They are like 2 bucks from Walmart. There's a good amount of old oil in that housing.
|
For #2, just want to add that I fill the housing 1/2 back up fresh oil before putting the filter into the housing, then pour oil all over the filter til the housing is almost full before I put the cap back on. This seem to help a bit on that first start after the oil change.
